NEW
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer
Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer Velodyne VI-Q 10 Subwoofer

Velodyne VI-Q 10 Subwoofer

$3,599.99
  • Apple Pay
  • Google Pay
  • Visa
  • Mastercard
  • Bitcoin
  • PayPal

Dedicated to the lowest octaves, subwoofers extend your system’s reach into deep, tactile bass you can both hear and feel. They relieve main speakers of demanding low-frequency duties, adding scale, impact, and immersion—whether it’s the rumble of film soundtracks or the foundation of live music.

Same Day Shipping
Order before 12pm
Shop with Confidence
Your order is insured
Free Technical Support
Mon - Fri, 9am - 6pm

A VIRTUOSO IN BASS PERFORMANCE

VI-Q Series distills over 40 years of Velodyne subwoofer mastery into three sealed-box designs—each app-controlled for precision, power, and seamless integration. From finely textured low-end to room-shaking impact, VI-Q delivers articulate, controlled bass that transforms music, movies, and games into fully immersive experiences.

VI-Q 10"

This sealed 10” subwoofer combines a triple-vented carbon fibre driver, dual-ferrite motor, and 76mm copper voice coil with 450W RMS Class D power. Compact yet commanding, VI-Q 10 delivers agile, precise bass with app-based DSP control for seamless room integration.

ENGINEERED FOR EXCURSION

A high-excursion carbon fibre cone, dual-ferrite magnet motor, and four-layer copper voice coil form a power plant capable of up to 28mm of linear travel. Triple motor ventilation ensures consistent output without heat compression—maintaining authority and nuance at any level.

COOL UNDER PRESSURE

Triple-stage motor ventilation—beneath the spider, through the pole plate, and via six rear voice-coil vents—keeps heat at bay during the most demanding passages. By reducing power compression and maintaining magnetic strength, VI-Q sustains peak output without sacrificing clarity or control.

AMPLIFIED WITH INTENT

VI-Q’s DSP-controlled Class D amplifier delivers up to 650W RMS and 1,200W peak power (model dependent). With MOSFET output stages, anti-clipping, and thermal protection, it maintains composure under pressure—supplying clean, efficient drive that keeps distortion at bay.

CABINETRY FOR CONTROL

VI-Q’s sealed HDF enclosure is reinforced with a massive 50mm front baffle and internal bracing to eliminate cabinet resonance. With matte finishes to prevent light reflections, it delivers clean impulse response and tight, controlled bass at reference-level playback.

DIALED IN

Rear-panel controls give you hands-on command of phase (0°/180°), crossover (50–180 Hz), and volume, plus the ability to engage DSP mode at will. Combine these tactile adjustments with app-based fine-tuning, and VI-Q responds precisely to your room, your system, and your taste.

DEPTH THAT DEFIES

Reaching as low as 18 Hz (±10 dB) in the 15” model, VI-Q delivers bass that’s not just heard, but felt—pressurising the room with infrasonic weight while preserving speed and definition. Whether it’s a cinematic earthquake or the fundamental of a pipe organ, the foundation is rock-solid.

TUNED TO YOUR FREQUENCY

Using the iWoofer™ Pro app, VI-Q offers automatic room correction, 25-band parametric EQ, and adjustable crossover slopes up to 48dB/octave. Fine-tune gain, phase, delay, and bass extension from your listening position for a seamless blend with your main speakers.

CONNECTED ON EVERY LEVEL

From modern AV processors to vintage stereo amps, VI-Q integrates with ease. With RCA, XLR, and high-level inputs, plus trigger in and USB power output for Velodyne’s wireless system, it supports any setup—and daisy-chains effortlessly for multi-subwoofer systems.

prefer the in-store experience?

Audio Visual Revolution Pty Ltd is supported by an incredible network of Australian audio specialists retailing our product. For all in-store demonstrations or to support your local retailer, click below.

Velodyne VI-Q 10 Subwoofer

Technical specifications

Driver 10" front firing driver
Amplifier Class D: 450 W RMS / 850 W Peak
Frequency Response: Overall 28 – 200 Hz
Frequency Response: (± 3 dB) 25 – 180 Hz
Low Pass Crossover 50 Hz to 180 Hz (12 dB/Octave)
Phase 0 / 180 degrees
Cabinet Design 22 mm HDF, 50 mm front
Magnet Structure Dual ferrite magnet motor
Woofer 10" high-excursion triple-vented basket driver with carbon fiber membrane and convex cone
Voice Coil Four Layer 3" / 76 mm voice coil
Input Gold-plated Stereo/LFE RCA, Nickel-plated XLR and High-level in
Output Gold-plated Stereo/LFE RCA, Nickel-plated XLR
Power Selector Off / Auto / On
Finishes Flat matte black paint
Dimensions (H x W x D) (inc. feet & connectors) 400 x 320 x 380 mm
Weight 22 kg

You may also like